- #SYNOLOGY DRIVE SPACE CALCULATOR INSTALL#
- #SYNOLOGY DRIVE SPACE CALCULATOR FREE#
- #SYNOLOGY DRIVE SPACE CALCULATOR MAC#
#SYNOLOGY DRIVE SPACE CALCULATOR MAC#
If the user on the MAC has the correct permissions they will be able to now read/write to this location.įrom a Windows device you can open a run command and type: \\IP_of_NAS_DEVICE\Name_of_shared_folderĪlternatively you can map a drive in Windows from an explorer window to add a more permanent drive letter to your new shared folder location: Test access to your new Shared Folderįrom a MAC device you should now be able use Finder to navigate to your Synology device and see the shared folder. The wizard will walk you through this process or you can view me go through it in the linked video above. Provide a Name, Description, and configure settings. You could go on to create an additional Shared Folder, Private and give only yourself read/write access to that location.Ĭontrol Panel – Shared Folder – Create New Shared Folder For example, you could create a Videos Shared Folder and give yourself read/write access and the rest of the users in your household read only access. Create a Shared FolderĪ shared folder will exists on the volume you just created and serves as the content space that you or your users will interact with. Parity Consistency Check is currently running on Volume 1 and may affect overall system performance. Your Synology device is use-able during this time-frame but will run much slower: Note on volume creation: Depending on the size of your drives and the type of RAID you configure it can take upwards of 24 hours for the RAID to complete.
If you have matching hardware though, you will likely be better served by RAID. So, if you’ve just installed a few extra drives you had lying around, SHR might be a better solution for you. My research into this solution (which is configured via the quick option) is that it is best leveraged in situations where your Synology device does not contain matching drives. It most closely resembles RAID 5 in usage but has a few differences. Note on SHR: SHR is Synology’s propietary RAID-like solution. It provides a quick and easy interface that makes RAID decisions pretty simple. If you haven’t done so already I suggest taking a look at the Synology RAID Calculator. This is where you will configure the drives into your desired RAID configuration. Using the Storage Manager configure your drives into a system volume. Verify that DSM sees all drives that you have installed and that they are reporting healthy 8. Now is a good time to review the system configuration to ensure everything is reporting health and as expectedĮnsure system info is reporting normally and RAM/specs line up with what you purchased Take a note of the address and write-it down or copy it somewhere 7.
#SYNOLOGY DRIVE SPACE CALCULATOR FREE#
You definitely don’t need QuickConnect, but it does make accessing your NAS a little easier away from home so feel free to create one now. QuickConnect is Synology’s proprietary solution for accessing your NAS device externally of your network without having to deal with port forwarding or DDNS.
#SYNOLOGY DRIVE SPACE CALCULATOR INSTALL#
Note that if you elect Install Automatically that new versions of DSM will be automatically applied and your NAS will reboot. while you are away from home) then you will have to set a static IP here. Additionally, if you ever plan to access your Synology device externally (ex. A lot of the functionality that a Synology device offeres works best with a static IP set. While the Wizard seems to indicate that DHCP is preferred you should strongly consider setting a static IP. Point to the DSM location that you previously downloadedĮnter your admin credentials – don’t forget these as you will have to reset your Synology NAS if you do Using the Synology Assistant locate your NAS, right click, and click Install. Install the Synology Disk Station Manager The Synology Assistant is capable of scanning your network and locating all Synology devices allowing you to interact with the NAS to perform some initial configurations.Ħ. With your Synology unit powered on and connected to your network it will likely pick up an IP from your router or other device that is performing DHCP functionality. Use Synology Assistant to ‘find’ your NAS Station This is just a simple wizard-based installation – follow the prompts to complete the install 5. The latest Synology Disk Station Manager (DSM) for your model.Power on unit and you should hear an initial beep after a few minutes.Connect to NAS to network (most likely via LAN cable from NAS unit to switch or router).
0 kommentar(er)
